We are hiring! Run with Riesterer and Schnell: Apply Today
We are hiring! Run with Riesterer and Schnell: Apply Today
Search
Choose a Location
Drawn tractor hookup
Rubber deflectors
GearboxA heavy-duty gearbox transfers power to the power-band drive belts through cross shafts with intermediate bearing supports:
Rotor bearingsThe rotor bearings are now made of steel and have a three-lip seal to keep the dirt out and increase the life of the bearings.
The side and center bearings now have guards in order to avoid leaks and dust, increasing the life of the bearings.
Compare the specifications of up to 4 models
| Power requirements | 115-flail-shredder Current Model |
|---|---|
| Tractor PTO hp range | 67-149 kW 90-200 hp |
| Tractor RPM | 1,000 rpm |
| Gear case | |
| Knives | |
| Number of knives | 120 |
| Knife dimensions | 7.87 x 63.5 x 143 mm 0.31 x 2.5 x 5.63 in. |
| Knife mounting system | |
| Type | Heat-treated side slice |
| Knives overlap | |
| Tip speed | 171 km/h 106 mph |
| Rotor | |
| Rotor speed | 1,500 rpm |
| Rotor diameter | 139.7 mm 5.5 in. |
| Rotor bearing | Sealed, self-aligning, piloted housing, auxiliary |
| Bearing size | 41.28 mm 1.625 in. |
| Drivetrain | |
| Belts | Power band, triple 5VX |
| PTO drivelines | |
| Mainframe | |
| Hitch | Drawn |
| Hood thickness | 6.35 mm 0.25 in. |
| Safety deflector | Yes |
| Gauge wheels | 4 infinitely adjustable |
| Warning lights | |
| Cutting capacity | |
| Cutting width | 4.6 m 15 ft |
| Cutting height | 7.6 to 25.4 cm 3 to 10 in. |
| Dimensions | |
| Transport width | 2.39 m 7.83 ft |
| Transport length | 5.82 m 19.08 ft |
| Weight | 1,497 kg 3,300 lb |
| Optional equipment | |
| Easy transport | |
| Constant velocity joint driveline | Yes |
| Skid shoes |
Steel deflectors
Rubber deflectorsDeflectors can be used on the front of the shredder to prevent cut material from being thrown forward. Rubber deflectors are recommended when shredding in rocky areas.
Additional gauge wheel
Additional gauge wheels can be ordered, if needed, for improved cutting performance.
Center divider The center divider minimizes the center strip of uncut material when clipping grass, idle acres, or non-row-crop crops.
This bundle is for use on all shredders with the following serial numbers:
NOTE: Previous machines did not have center-cut knives. To install, order them from Parts.
