We are hiring! Run with Riesterer and Schnell: Apply Today
We are hiring! Run with Riesterer and Schnell: Apply Today
Search
Choose a Location
Compare the specifications of up to 4 models
Key Specs | 3032e Current Model |
---|---|
Engine power (gross) | 22.9 kW 31.2 hp |
Power take-off (PTO) power | 18.6 kW 25 hp |
Steering hydraulics | 15 L/min 4 gpm |
Implement hydraulics | 20.2 L/min 5.3 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Cruise control | Optional |
Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
Wheelbase | 159.5 cm 62.8 in. |
Engine | |
Family | EYDXL1.64NDA FYDXL1.64NDA GYDXL1.64NDA |
Manufacturer | Yanmar |
Engine model | 3TNV88C-NJT |
Engine power (gross) | 22.9 kW 31.2 hp |
Power take-off (PTO) power | 18.6 kW 25 hp |
Rated engine speed | 2500 rpm |
Type | Diesel |
Injection pump type | High pressure common rail direct injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 87 Nm 64.2 lb-ft |
Fuel tank capacity | 28.5 L 7.5 U.S. gal. |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 55 amp |
Starter size | 1.4 kW 1.9 hp |
Fuel system | |
Type | High pressure common rail direct injection |
Fuel consumption | |
Transmission | |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Optional transmission; forward/reverse | |
Left-hand reverser | No |
Transmission gear ranges | |
Final drive | Bull Gear |
Brakes | Wet disc |
Steering | Power steering |
Clutch, wet/dry | |
Clutch disk diameter wet clutch | |
Axle capacity | Front 798 kg 1760 lb Rear 1197 kg 2640 lb |
Creeper | No |
Cruise control | Optional |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
Pump type | Dual gear |
Maximum operating pressure | 172.4 bar 2500 psi |
Draft control sensing | Position control |
Remote control valves available | Up to two (optional) |
3-point hitch | |
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
Power take-off (PTO) | |
Standard | 540 rpm at 2500 rpm |
Optional | |
Control | Independent |
Clutch | Wet disk |
Brake (for mid and rear PTO) | Wet disk |
Engagement method | |
Fluid capacities | |
Crankcase with filter | 4.5 L 4.8 qt |
Transmission and hydraulic system | |
Final drive | |
Type | Bull Gear |
Differential lock | |
Operator station | |
Rollover protective structure | Type Foldable ASABE S478 |
Platform - flat/straddle | Semi-flat |
Gear shift location - console/floor | Left-hand side |
Cab | |
Compliance | |
Visibility | |
Air conditioning, temperature differential | |
Doors | |
Noise rating | |
Seat equipment | |
Dimensions | |
Wheelbase | 159.5 cm 62.8 in. |
Front axle clearance | 36.3 cm 14.3 in. |
Turning radius with brakes | |
Turning radius without brakes | 2.9 m 9.4 ft |
Limited slip differential | |
Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
Tires | |
Front | Farm - 7-14 Turf - 27x8.5-15 R4 - 25x8.5-14 R4 - 27x8.5-15 |
Rear | Farm - 11.2-24 Turf - 41x14-20 R4 - 15-19.5 R4 - 43x16-20 |
Front tread range | |
Rear tread spacing | |
Miscellaneous | |
Toolbox | |
Tilt steering wheel | |
12-V Outlet |
We design our Compact Utility Tractor Hoods for the harsh, extreme environments they are intended to be used in. We have developed them to be tough and durable. How tough? See what happens when you drop an 8.8 lb (4 kg) Shot Put on one of our composite hoods in – 20 F. (- 28.89 C) temperatures. Don’t do that with a metal hood.