We are hiring! Run with Riesterer and Schnell: Apply Today
We are hiring! Run with Riesterer and Schnell: Apply Today
Search
Choose a Location
Compare the specifications of up to 4 models
Key Specs | 3046r Current Model |
---|---|
Engine power (gross) | SAE J1995 rated power: 33.3 kW 44.7 hp 45.3 PS at 2600 rpm |
Power take-off (PTO) power | 25.2 kW 33.9 hp |
Steering hydraulics | 23.5 L/min 6.2 gpm |
Implement hydraulics | 34.3 L/min 9.1 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms | 995 kg 2194 lb |
Standard transmission; forward/reverse | eHydro transmission |
Cruise control | Standard |
Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1391 kg 3066 lb Cab: 1818 kg 4008 lb |
Wheelbase | 1727 mm 68 in. |
Engine | |
Family | |
Manufacturer | Yanmaru00ae |
Engine model | 3TNV86CHT-MJTV |
Engine power (gross) | SAE J1995 rated power: 33.3 kW 44.7 hp 45.3 PS at 2600 rpm |
Power take-off (PTO) power | 25.2 kW 33.9 hp |
Rated engine speed | 2600 rpm |
Type | Diesel |
Injection pump type | High pressure common rail direct injection |
Aspiration | Turbocharged and intercooled |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | Three cylinders: 1.57 L 95.7 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 86 x 90 mm 3.4 x 3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Liquid |
Air cleaner | Dual element |
Engine torque at rated speed | 112.3 Nm 90 lb-ft |
Fuel tank capacity | OOS: 37.4 L 10 U.S. gal. Cab only: 47.6 L 12.6 U.S. gal. |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 75 amp |
Starter size | 1.4 kW 1.9 hp |
Fuel system | |
Type | High pressure common rail direct injection |
Fuel consumption | |
Transmission | |
Standard transmission; forward/reverse | eHydro transmission |
Optional transmission; forward/reverse | |
Left-hand reverser | |
Transmission gear ranges | Three-range, infinitely variable |
Final drive | Spur gear |
Brakes | Wet disk |
Steering | Hydrostatic power steering |
Clutch, wet/dry | |
Clutch disk diameter wet clutch | |
Axle capacity | Front 1450 kg 3197 lb Rear 1850 kg 4079 lb |
Creeper | |
Cruise control | Standard |
Differential lock | |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | Steering 23.5 L/min 6.2 gpm Implement 34.3 L/min 9.1 gpm 57.8 L/min 15.3 gpm |
Pump type | Single gear |
Maximum operating pressure | 172 bar 2495 psi |
Draft control sensing | Position control |
Remote control valves available | Up to six rear remotes |
3-point hitch | |
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 995 kg 2194 lb |
Power take-off (PTO) | |
Standard | Independent rear: 540 rpm |
Optional | Mid: 2100 rpm |
Control | Lever and switch |
Clutch | Wet disk |
Brake (for mid and rear PTO) | Wet disk |
Engagement method | |
Fluid capacities | |
Crankcase with filter | 5.7 L 6 qt |
Transmission and hydraulic system | 26.5 L 7 U.S. gal. |
Final drive | |
Type | Spur gear |
Differential lock | |
Operator station | |
Rollover protective structure | Type Foldable |
Platform - flat/straddle | One-piece semi flat |
Gear shift location - console/floor | |
Cab | |
Compliance | Complies with OSHA, SAE, and CSA standards for rollover protection |
Visibility | 360 degree (angle) |
Air conditioning, temperature differential | |
Doors | Two |
Noise rating | 80 dBA |
Seat equipment | Scissor-link |
Dimensions | |
Height | |
Wheelbase | 1727 mm 68 in. |
Front axle clearance | Minimum: 171 mm 6.7 in. Maximum: 299 mm 11.8 in. |
Turning radius with brakes | 2.7 m 8.8 ft |
Turning radius without brakes | 2.8 m 9.2 ft |
Limited slip differential | |
Approximate shipping weight (open-station; cab) | OOS: 1391 kg 3066 lb Cab: 1818 kg 4008 lb |
Tires | |
Front | R1 Bar: 7-14 R3 Turf : 27x8.50-15 R3 Turf Special: 25/10.5LLx15 R4 Industrial: 25x8.5-14 or 27x8.5-15 |
Rear | R1 Bar: 11.2-24 R3 Turf: 41x14-20 R3 Turf Special: 41x18LL-16.1 R4 Industrial: 15-19.5 or 43x16-20 |
Front tread range | 1117 mm 44 in. |
Rear tread spacing | 1031 mm 40.6 in. |
Miscellaneous | |
Toolbox | |
Tilt steering wheel | |
12-V Outlet |
We design our Compact Utility Tractor Hoods for the harsh, extreme environments they are intended to be used in. We have developed them to be tough and durable. How tough? See what happens when you drop an 8.8 lb (4 kg) Shot Put on one of our composite hoods in – 20 F. (- 28.89 C) temperatures. Don’t do that with a metal hood.