We are hiring! Run with Riesterer and Schnell: Apply Today
We are hiring! Run with Riesterer and Schnell: Apply Today
Search
Choose a Location
Operators can add the optional 35.56-cm (14-in.) diameter rolling basket to help break up clods for improved levelness and uniformity of field finish. A wrench can be used to adjust the down pressure of the rolling basket to suit the operator’s needs.
Choose notched or spherical blades with cast spools for the Frontier™ DH15 and DH16 Series Disk Harrows.
Notched blades aggressively cut and mulch, while spherical (smooth) blades slice and mix residue for a smoother finish.
There are three blade configurations:
Disk gangs are easily adjustable to match changing soil conditions with Frontier™ disk harrows.
Use a more aggressive angle to tear up and penetrate high residue and soil. Reduce the angle for a smoother finish.
Crank adjustment for front-to-rear leveling on the Frontier™ disk harrow lets the operator easily fine-tune disk leveling to avoid ridges and valleys in varying soil types and field conditions.
The working depth is controlled with the depth control bar. Simply lock the pin in one of the seven positions for the working depth required.
The Frontier™ DH15 Series Disk Harrow hydraulic controls let the operator raise and lower the disk while on the go. Safety chains come standard with all models.
The middle breaker cuts out the center bulk for a more level soil profile, ensuring complete coverage on each pass.
Furrow filler field-installed kits provide an additional smaller-diameter disk blade to the outside of each rear gang, helping to fill in the furrow left by the outermost disk blade.
The scraper kit for furrow fillers – two per kit – removes soil buildup from furrow fillers in wet, sticky soil types.
The scraper kit removes soil buildup from disk blades in wet, sticky soil types.
The middle breaker removes the center balk of dirt left between the front disk gangs.
The field-installed dual-wheel kit adds two additional transport tires to the machine.
Dimensions | DH1508 Current Model |
---|---|
Weight | |
Operating | 1,124.9 kg 2,480 lb or 1,190.2 kg 2,624 lb |
Shipping | 1,158.9 kg 2,555 lb or 1,224.2 kg 2,699 lb |
Tractor requirements | |
Hitch | |
Type | Level lift drawn with clevis |
Category | |
Quick coupler compatibility | |
Blade | |
Spacing | Front 19.1 cm 7.5 in. Rear 19.1 cm 7.5 in. |
Size | 50.8 cm 20 in. or 55.9 cm 22 in. |
Thickness | 3.5 mm 0.1378 in. or 4 mm 0.1575 in. |
Quantity | 32 |
Type | Notched (front) / Notched (rear) Standard Smooth (front) / Smooth (rear) Available Notched (front) / Smooth (rear) Available |
Gang axle | |
Diameter | 28.6 mm 1.125 in. |
Type | Square |
Material | C1045 |
Gang angles | |
Front | 9, 11, 12, 14, 15, 16, 19, 22, 25 degree (angle) |
Rear | 5, 8, 9, 11, 12, 14, 15, 17, 20, 23 degree (angle) |
Tubing | |
Frame | 101.6x76.2x4.8 mm 4x3x0.1875 in. and 127x76.2x6.4 mm 5x3x0.25 in. |
Gang | 101.6x76.2x4.8 mm 4x3x0.1875 in. |
Bearing hanger | |
Material | Steel |
Size | 50.8x101.6 mm 2x4 in. |
U-bolt size | 19.1 mm 0.75 in. |
Bearing type | Self-aligning trunion mount, sealed or lubricated ball bearings |
Depth control | |
Lighting and safety | |
Transport lights | |
Safety chain | Standard |
Jack | Standard |
Hydraulics | |
Cylinder size | 7.6x20.3 cm 3x8 in. |
Hose length | 381 cm 150 in. |
Tires | |
Type | Pneumatic |
Size | 9.5L-15 6 ply |
Set-up time | |
Warranty | |