7P Poly Utility Cart

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

7P Poly Utility Cart

• The cart has a premium molded, high-density polyethylene box construction.
• Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
• Polyethylene body will not rust or dent; it stays looking new longer.
• 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
• Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
• Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
• Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
• Styling is compatible with other John Deere equipment.
• Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

Wheels

7P Utility Cart wheel

Wheels are mounted on a solid, one-piece axle for durability.
 
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

• Good flotation
• Minimal rolling resistance
• Shock absorption

Sloped tailgate

Sloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

Spring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

• Fast, easy attachment to the tractor hitch
• Spring pin to ensure the pin stays in place

Tilt latch

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

8Y Convertible Poly Utility Cart, push mode

8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m³) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

• Compatible with riding lawn tractors and garden tractors
• Durable poly construction
• All-terrain pneumatic tires
• Converts from tow cart to push cart without tools
• Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

• Firewood
• Lawn debris
• Sand
• Dirt
• Mulch
• Garden tools
• Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release
• Steep dump angle for complete emptying

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

10PX Poly Utility Cart

10PX Poly Utility Cart full-dump lever

The 10PX tow-behind cart is great for hauling lawn debris, sand, dirt, mulch, and plants:

• Large, 650-lb (295-kg) capacity
• 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
• Will not dent or rust
• 15x6 tubeless pneumatic tires with turf tread for maximum traction
• Easy, hands-free foot pedal dump release

Cart in partial-dump position

Cart in full-dump position

Hand lever releases 180-degree dump angle for complete emptying

• Empties all material
• Makes cleanup of the cart easier

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10PX Poly Utility Cart
Order number: LP72978

Oilite is a trademark of Beemer Precision, Incorporated.

13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Welded box

Welded box construction provides maximum reliability:

• Requires less setup time than the bolted construction.
• Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.

Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

• Good flotation
• Minimal rolling resistance
• Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch

Spring-pin tractor hitch

Tilt-dump latch

A large-diameter hitch pin provides plenty of strength:

• Fast, easy attachment to the tractor hitch
• Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

• Steep dump angle makes emptying easier.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

16YS Swivel Cart

The 17-cu-ft (0.48-m³) capacity 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Key features include:

• Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
• Convenient foot pedal release for easy dumping
• Molded stake pockets for enlarging the bed size

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

16YS Swivel Cart

Order number: LP68186

Oilite is a trademark of Beemer Precision Incorporated.

17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

• Firewood
• Lawn debris
• Sand
• Dirt
• Mulch
• Garden tools
• Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Key features of the 17P Utility Cart:

• Cart has premium molded polypropylene box construction.
• Polypropylene body will not rust or dent, staying new looking longer.
• 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
• Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
• Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
• Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
• Styling is compatible with other John Deere equipment.
• 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
• Wheels are mounted on a solid one-piece axle.
• Wheels turn on iron/Oilite® bushings with grease fitting for long life.
• Spring-loaded dump latch is easy to use.

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

6.5-bu (229-L) rear bagger

6.5-bu (229-L) rear bagger

The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:

• Two durable bags with a generous, 6.5-bu (229-L) capacity lift out for emptying and are easy to reinstall.
• Efficient lower chute provides smooth flow of material to reduce chance of plugging.
• Air-exhaust duct directs air from the hopper back and toward the ground for clean operation.
• Convenient bungee-cord fastener makes opening and closing the hopper easy.
• It is easy to install and remove the hopper, and no tools are required after the initial installation.
• Pins and spring clips hold the hopper and chute in place; there is nothing left to interfere with other attachments when removed.
• Loose-knit bags allow more air to flow through to provide complete bag filling in wet and heavy grass conditions.

Specifications

Tractor compatibility and requirements

The 6.5-bu (229-L) rear bagger is compatible with:

• 100 Series Tractors equipped with 48-in. (122-cm) Mower Deck.

 Requirements and/or recommendations:

• Front ballast is recommended when bagging, especially on hills or inclines.
• Use of rear tow-behind attachments that could come in contact with the hopper assembly is not recommended when the hopper assembly is installed.
• Special mower blades are not required.
• High-lift mower blades for use in difficult bagging conditions are included with BG20777 6.5-bu (229-L) hopper and chute for 100 Series, 48 in. (122 cm).

6.5-bu (229-L) hopper and chute on an S140 (front view)

6.5-bu (229-L) hopper and chute on an S140 (rear view)

Overview

The bagger kit can be set up without tools in minutes, provides efficient bagging performance, and has easy-to-empty bags. This is also commonly known as a material collection system (MCS).

Benefits

Bagging

• Two durable bags provide a generous 6.5-bu (229-L) capacity.
• The lower chute provides smooth airflow to reduce the chance of plugging.
• A duct directs air leaving the hopper toward the ground for clean operation.
• Loose-knit bags and a large exit duct allow more air flow to provide complete bag filling in wet grass conditions.

Emptying

• Monitor bag filling progress through a window; see light coming through the loose-knit bag or watch for grass lying against it.
• The hopper lid stays open while you empty the bags.
• The bags slide out with a pull and the handles make emptying easy.
• The hopper cover automatically latches when you close it.

Additional details

• Front ballast is recommended when bagging, especially on hills or inclines. Follow instructions in your operator’s manual.
• Use of rear tow-behind attachments that could contact the hopper assembly is not recommended.
• Installation:
• The bagger kit can be set up without tools in minutes.
• Special mower blades are not required for bagging. Three optional high-lift blades (GX21785) are included to increase bagging performance.
• The kit is easy to remove and stores compactly. No parts are left behind to interfere with other attachments.

The 6.5-bu (229-L) hopper and chute are for use with:

• Model year 2011 and newer 100 Series Tractors with 48-in. (122-cm) mower deck

Dump from the seat capability for 100 Series Tractors with a 6.5-bu material collection system (MCS)

MCS 6

The MCS 6 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere 100 Series and S240 Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere Material Collection System, installation is a breeze with simple hand tools.

Features:

• Lightweight aluminum construction
• Designed for full material expulsion
• Easy access self-latching spring tripped handle
• Ships almost fully assembled (5 minute handle assembly)
• Installs in seconds (after initial assembly)

Benefits:

• Easy - Convenient Access to dump handle directly from seat 
• Clean - No material handling, no mess 
• Efficient - Unload and go without leaving the seat 

NOTE: Fits John Deere 100 Series and S240 Tractor 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

MCS 6 attachment
Order number: LP47167

46-in. (117-cm) Front Blade

The front blade is excellent for pushing light snow or other loose material.

The blade is constructed for good performance and long life:

• Blade surface is curved to roll rather than push material, which requires less power and increased blade capacity.
• Bolt-on, replaceable cutting edge takes most of the wear to greatly extend the useful life of the blade.

For operator convenience, the blade comes with standard equipment for controlling it from the tractor seat:

• Blade can be angled left, right, or used in the straight-ahead position.

Full working range

Full working range

The 46-in. (117-cm) blade can be operated up to 6.5 in. (16.5 cm) above ground level.

Floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.

The lift-linkage design makes raising the blade easy.

Controlled from tractor seat

Left-hand blade control

For operator convenience, the blade comes with angling and lift components as standard equipment so it can be controlled from the tractor seat.

Front blade lift and angling components are included as standard equipment:

• Blade can be angled left, right, or used in the straight-ahead position.
• For 100 Series Tractors, L100 Series Lawn Tractors, G110 Garden Tractors, and S240 Tractor, lift components are provided with the blade so it can be raised and lowered from the tractor seat.

Specifications

Tractor compatibility and requirements

The 46-in. (117-cm) Front Blade is compatible with:

• 102, 115, 125, 135, 145, 155C, and 190C Tractors
• L100, L108, L110, L111, L118, L120, and L130 Lawn Tractors, and G110 Garden Tractor
• LA100, LA110, LA120, LA130, LA140, and LA150 Tractors
• LA105, LA115, LA125, LA135 Limited Edition, LA135 Special Edition, LA145, LA155, LA165, and LA175 Tractors
• D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170 Tractors
• E100, E110, E120, E130, E140, E150, E160, E170, and E180 Tractors
• S100, S110, S120, S130, S140, S160, S170, and S180 Tractors
• S220 and S240 Tractors

For model years 2016 and newer, the 46-in. (117-cm) Front Blade (BG20943) has a change to the mounting frame to make it compatible with model year 2016 and newer 100 Series and 200 SeriesTractors:

• The model years 2016 and newer Front Blades are also backward compatible with model year 2015 and older 100 and 200 Series Tractors.
• The model year 2015 46-in. (117-cm) Front Blade (BG20020) is not compatible with model year 2016 and newer tractors.
  • A model year 2016 and newer tractor steering change from a dual drag link system to a single drag link and tie rod design causes interference with older front blades.

Requirements and/or recommendations:

• Rear weights and tire chains are required for additional traction.

Battery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

• Automatically determines if the battery is 6- or 12-V and adjusts accordingly
• Helps maintain battery in good condition and ensures it is fully charged
• Powers on to charge battery and powers off when fully charged
• 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
• 1.5-amp trickle charges small batteries in 2 to 12 hours
• Maintains large battery charges
• Hookup protection guards battery and charger from damage 

Includes a choice of battery connection methods:

• Standard color-coded clips to connect to any battery
• Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use

Bucket holder (single)

Transporting mulch, plants, or debris is easier with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. For use with any standard 5-gal. (19-L) or 6-gal. (23-L) bucket, the bucket holder is designed to carry up to 70 lb (32 kg) of material.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (single)
Order number: LPJD100

8-oz (237-mL) Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round: 

• Has corrosion preventers
• For lawn and garden equipment and other gasoline-powered vehicles
• Ensures quick starts in all two- and four-cycle engines
• Use in gasoline, gasoline-oil mixture, and ethanol blends
• Use to treat gas cans at each fill-up or use at every fill-up of vehicle
• Keeps fuel fresh for 12 months
• Contains a fuel injector and carburetor cleaner
• 1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit John Deere Parts.

Helpful tips:

• Add fuel stabilizer every time fuel is purchased.
• Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
• John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
• Use plastic fuel containers to store fuel; ask a local John Deere dealer.
• For best results, use a spill-proof gas can that automatically seals the gas can vent.
• Store fuel in a cool, dry, dark place in a sealed fuel can.
• Fill tank to the top every time the machine is put away.
  • Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine. 

For more information on fuel, visit John Deere Groundscare.

Deluxe smart connector

The John Deere MowerPlus deluxe smart connector wirelessly links some 100 and 200 Series Tractor models and Z500 Series ZTrak™ Mowers to the MowerPlus app on a mobile device:

• No tools are needed for installation.
• Detailed setup instructions are included.
• The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on or off, and the mobile device app is running within range.
• The wireless connector and app work together to offer helpful information.

Equipment features available for viewing on the MowerPlus app include:

• Tractor engine hours automatically synchronized to the app
• In-app maintenance reminders and log, based on engine hours
• Fuel level - even when away from the tractor, the app remembers information from the last synchronization, such as the fuel level.
  • When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
• Help to determine the best time to mow
• Expert pre-mow optimization tips
• Maintenance walk-through instructions

The operator is able to visit their device’s app store to see new app features as they are added.

Since the smart connector communicates instrument cluster information, future app releases will provide additional operating recommendations and notifications.

Smart connector, wiring harness, and twist ties

One end of the wiring harness plugs into the back of the fuel gauge. The other ends plug into the smart connector and the tractor's wiring harness. The Z500 Mowers come with a dedicated connectivity connector, so the new wire harness is not needed.

Compatibility and requirements

MowerPlus deluxe smart connector (BUC10929) is for use with the following lawn tractors and ZTrak Mowers:

• All S120, S130, S160, S170, and S180 Tractors
• Model year 2021 and newer S240 Tractors (serial number 880,001-)
• Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

The MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc.

StarLock blade design

Blades with the StarLock™ mounting system are available for normal, difficult mulching, and bagging conditions.

High-lift bagging blade

These blades are available for use with the 48-in. (122-cm) Top-Discharge Mower Deck.

• For use in difficult bagging conditions
• Can be used for mulching and side-discharge operations

StarLock blade design

Blades with the StarLock™ mounting system are available for normal, difficult mulching, and bagging conditions.

The Edge cutting cystem

The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs.

The Edge cutting system provides the John Deere mower owner with superior mowing convenience, performance, and reliability:

• Deep-deck mower design lifts grass for a clean, even cut.
• Smooth underside of the mower prevents grass buildup and evenly disperses grass clippings.
• The rolled outer edge of the deck provides extra strength and protection.
• Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

48-in. (122-cm) Mower

48-in. (122-cm) Mower Deck

The 48-in. (122-cm) Mower Deck is a three-spindle design with heavy-duty characteristics:

• Four mower wheels are standard equipment for a smooth mowing job, even in rolling terrain.
• Flexible discharge chute minimizes property and mower deck damage.
• No tools are needed to go from mulching (with mulch cover) to side discharging to rear bagging.
• Mulch cover is standard equipment.
• GX20819 high-performance mulching blade is available to enhance the mulching performance.

The mower deck has a rolled lip to provide greater strength and protection. The rugged 12-­gauge, 0.105-­in. (2.7­-mm) steel mower deck will provide years of dependable mowing.

The blade­-to-­spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience. A cut­-and-­throw 6.5-­bu (229.1 L) rear bagger is sold separately.

A complete mower deck can be ordered as a replacement part.

StarLock™ blade design

StarLock blade design

StarLock blade design (42-in. [107-cm] and 48-in. [122-cm] mowers) keeps the blade bolt at the correct torque for easy removal.

Striping kit brush - top view

Striping kit brush - side view

Features and benefits

• Homeowners can achieve results just like the professionals
• Brush is easy to adjust for varying mower cutting height
• Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
• The brush striping kit is a very economical and functional attachment

Compatible with the following:

• 48-in. (122-cm) or 54-in. (137-cm) Mower Deck for model year 2018 and newer 100 Series Tractors (including S and E prefix)
• 48X or 54X - 48-in. (122-cm) or 54-in. (137-cm) Side-Discharge Mower for X300, X320, X324, X340, X360, X500, X520, X530, X534, X540, and X590 (model year 2015) Tractors

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Mower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

• Lawn tractors
• Lawn and garden tractors
• Riding mowers
• Front mowers
• Commercial walk-behind mowers
• Zero-turn-radius mowers

42-in. (107-cm) mulch cover shown

The mulch cover is available as an option for vehicles equipped with the top-discharge 48-in. (122-cm) mower deck.

Key features:

• Protects against sun damage, rain, dust, and tree sap
• Split back for fast fitting and easy access after installation
• Fabric is coated for maximum water resistance and repellency
• Reinforcements at key locations
• Reinforced air vent lets air circulate and helps prevent ballooning in wind
• Storage pocket reverses to attractive stuff case

For For use with:

• 100 Series and 200 Series Tractors with MCS installed
• X300 Series Tractors with 42-in. (107-cm) Mower Deck and MCS installed

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

Riding mower cover for tractor with MCS
Order number: LP70686

Protective cover (medium deluxe)

Features include:

• Wipe-clean reinforced bottom around mower deck
• Easy-on side handles makes snugging down cover a snap
• Dual reinforced air vents let air circulate and help prevent ballooning in wind
• Interior lining and integrated muffler heat shield
• Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
• Easy-on split back for fast fitting and easy access after installation
• Handy storage pocket reverses into an attractive storage case
• Two-year warranty

Cover provides heavy-duty protection for 100 Series, LT, LX, and 200 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (medium deluxe)

Order number: LP93617

Protective cover (standard)

Features include:

• Dual vents let air circulate and help prevent ballooning in wind
• Elastic shock cord in bottom hem for a quick, custom-like fit
• Coated fabric for maximum water protection
• One-year warranty

Cover provides all-season protection for 100 Series, 200 Series, and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (standard)

Order number: LP93917

Seat cover, standard medium

Seat cover protects new seats and renews old seats:

• Cushioned seat for extra comfort
• Four convenient pockets for keeping tools and gear within reach
• Elastic cord in bottom hem for a custom fit
• Medium size fits seats with backrests up to 15 in. (381 mm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

AUC17789 spark arrester shown

NOTE: Spark arrester design and appearance vary depending on the muffler outlet. Photo is representative of some spark arrester designs.

A spark arrester is a device for preventing the escape of sparks. In some locations, the law requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except on watered lawns) without a spark arrester.

This kit complies with laws in the state of California, requiring its use under certain conditions. For further information on this law, consult No. 442.5 of the California Public Resources Code.

15-gal. (57-L) Mounted Sprayer for 100 and 200 Series

The 15-gal. (57-L) tractor-mounted sprayer is compatible with the 100 and 200 Series Tractors. Convenient mounting, easy maneuverability, and overall versatility make this a perfect choice for a John Deere lawn tractor. It provides an excellent way to apply spray material, including liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 32-in. (81-cm) boom that sprays a 60-in. (152-cm) spray swath. It is also equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9.1 m). It has a custom mounting bracket that utilizes the existing frame holes for no-tools mounting after initial assembly. A recirculation kit is included.

Features include:

• Custom mounting hardware uses existing frame holes
• Mounts in seconds after initial assembly
• Compatible with 100 and 200 Series Tractors
• SHURflo® 100 psi, 2.1 gpm (8 L/min) on-demand diaphragm-type pump is designed for high-hour commercial applications. It can be run dry without damage.
• The brass-tipped spray wand is included as standard equipment. It is constructed of non-corrosive polypropylene material with Viton® components for multi-use applications.
• Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
• Recirculation keeps material mixed and moving
• Control valve directs spray to either the boom or spray wand
• Convenient electrical hookup includes all necessary wiring
• Rugged translucent yellow tank with molded fill-level indicators (in gal. and L)

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

15-gal. (57-L) Mounted Sprayer for 100 and 200 Series Tractors

Order number: LP53283

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

• This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
• Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
• A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

• Sprayers provide an excellent way to apply liquid fertilizer.
• Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

• Fertilizer is more readily available to plants.
• The fertilizer need not be worked into the soil by watering or rain before it will work.
• Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

• 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
• Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
• Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
• The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties.

• Sprayers provide an excellent way to apply liquid fertilizer.
• Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

• Fertilizer is more readily available to plants.
• The fertilizer need not be worked into the soil by watering or rain before it will work.
• Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

• Seed
• Fertilizer
• Insecticide
• Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

• Positive on/off system (no cables)
• 125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
• 13-in. (33-cm) pneumatic tires for easy rolling
• Enclosed gearbox (metal gears)
• Ergonomic dual handle featuring Accu-way™
• Accu-way even spread pattern adjustment
• Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

• Dial position locks and unlocks automatically.
• More than 80 settings provide an accurate application of materials.

Specifications

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

175-lb (79-kg) Pull Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

• Seed
• Fertilizer
• Insecticide
• Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

• Positive on/off system (no cables)
• 175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
• 13-in. (33-cm) pneumatic tires for easy rolling
• Fully enclosed gear box with metal gears for long life
• Accu-way even spread pattern adjustment
• Includes screen and cover

Hopper screen and throat opening

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

• Dial position locks and unlocks automatically.
• More than 80 settings provide an accurate application of materials.

Specifications

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

40-in. (102-cm) Tow-Behind Aerator Spreader

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

• 40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
• 132 steel-tine tips on 8-in. (20-cm) diameter tine stars
• Three-position, full-sized lift lever
• Direct spreader drive for consistent performance
• Adjustable flow control
• 100-lb (45-kg) spreader capacity
• 4.10/3.5-4 pneumatic tires for easy pulling
• 75-lb (34-kg) capacity weight tray

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications 

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

1. Rear wheel weights are recommended for additional traction.
2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for 100 Series, 200 Series, Select Series™ X300s, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
   The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Broadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

• The polyethylene hopper will not dent or rust.
• All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
• Large pneumatic turf tires ensure a positive drive and smooth operation.
• High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
• Fully enclosed gearbox eliminates downtime and maintenance.
• Autoflow feature stops the flow of materials - automatically - to prevent burns.
• Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun canopy

The sun canopy provides protection from the sun's rays and gives the operator some cooling shade during the hot summer days.

Quick sun protection:

• Slips into CargO Mount™ system ports for quick installation
• Protects operator from the sun’s rays
• Tough woven polyester construction for strength and durability
• Designed to fit model year 2011 and newer 100 and 200 Series Tractors

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Sun canopy
Order number: LP68122

40 in. (102-cm) Tow-Behind Thatcherator

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

• 40-in. (102-cm) width to cover ground fast
• 20 spring-loaded tines for maximum performance
• Three-position adjustment
• Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm). Add an extension to one end of the thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Requirements and/or recommendations:

1. Rear wheel weights are recommended for additional traction.
2. For use with the following John Deere vehicles and other lawn and garden tractors of similar size:
   • 100 Series Tractors
   • 200 Series Tractors
   • X300 Series Tractors
   • X500 Series Tractors
   • X700 Series Tractors

Ordering information

Contact a local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

TerraGrip Traction Belt

Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.

Features:

• Rubber slats surround the tire and will not damage driveways or sidewalks.
• No steel touches the driving surface.
• No-tools installation utilizes a traditional steel chain attachment system.
• Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
• TerraGrip Traction Belts are approved for John Deere 100, 200, X300, X500 M-T, and X700 Series Tractors.

Additional information for 4-wheel-steer tractor models:

• X700 Series – requires wheel spacer sold separately
• X500 Series – requires wheel stop adjustment
• X300 Series – no additional requirements

Tire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using equipment such as a snow blower or front blade.

One pair of chains is included in each bundle.

Compatibility

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, E120, S100, S110, S120, and S140 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, E180, S130, S160, S170, S180, and S220 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016 and newer (serial number 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year 2015 and older (serial number -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

• 42-in. (107-cm) clearing width
• 17-bu (599-L) capacity to make fast work of picking up material
• Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
• Hitch has seven positions to match up correctly with a variety of vehicles
• Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
• A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications